AMB-2020HT(T)-E User’s Manual
24
BIOS Features Setup
This section allows you to configure and improve your system and allows you to set up some system
features according to your preference.
ROM / PCI ISA BIOS
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
Virus Warning
: Disabled
Video BIOS Shadow
: Enabled
CPU Internal Cache
: Enabled
C8000-CBFFF Shadow
: Disabled
CC000-CFFFF Shadow
: Disabled
Quick Power On Self Test
: Enabled
D0000-D3FFF Shadow
: Disabled
Boot Sequence
: A, C, SCSI
D4000-D7FFF Shadow
: Disabled
Swap Floppy Drive
: Disabled
D8000-DBFFF Shadow
: Disabled
Boot Up Floppy Seek
: Enabled
DC000-DFFF Shadow
: Disabled
Boot Up Numlock Status
: On
Boot Up System Speed
: High
Gate A20 Option
: Fast
Memory Parity Check
: Enabled
Typematic Rate Setting
: Disabled
Typematic Rate (chars/Sec)
: 6
Typematic Delay (Msec)
: 250
ESC : Quit
á
â
à
ß
: Select Item
Security Option
: Setup
F1 : Help
PU/PD/+/- : Modify
PCI /VGA Palette Snoop
: Disabled
F5 : Old
Values
(Shift) F2 : Color
OS Select For DRAM>64MB
: Non-OS2
F6 : Load BIOS Defaults
Report No FDD For WIN 95
: Yes
F7 : Load Setup Defaults
Virus Warning
This item protects the boot sector and partition table of your hard disk against accidental modifications. If
an attempt is made, the BIOS will halt the system and display a warning message. If this occurs, you can
either allow the operation to continue or run an anti- virus program to locate and remove the problem.
NOTE
: Many disk diagnostic programs, which attempt to access the boot sector table, can cause the
virus warning. If you will run such a program, disable the Virus Warning feature.
CPU Internal Cache / External Cache
These items allow you to enable (speed up memory access) or disable the cache function. By default,
these items are
Enabled
.
Quick Power On Self Test
This choice speeds up the Power On Self Test (POST) after you power up the system. If it is set to
Enabled
, BIOS will skip some items. By default, this choice is
Enabled
.
Boot Sequence
This field determines the drive that the system searches first for an operating system. The options are:
A, C, SCSI
D, A, SCSI
SCSI, C, A
C, A, SCSI
E, A, SCSI
C only
C, CDROM, A
F, A, SCSI
LS120, C
CDROM, C, A
SCSI, A, C
The default value is
A, C, SCSI
.