Chapter 3
–
OS Flash guide
26
Co
m
pa
ct F
anl
ess Embe
dd
ed
AI@
Edge
Bo
x PC
BO
XER
-8
130AI
3.1 Force USB Recovery Mode
To place system in Force USB Recovery Mode:
1. Power down the device. If connected, remove the AC adapter from the device. The
device MUST be powered OFF, not in a suspend or sleep state.
2. Connect the Micro-B plug on the USB cable to the Recovery (USB Micro-B) Port on
the device and the other end to an available USB port on the host PC.
3. Connect the power adapter to the device.
4. Press and release the POWER button to power on device. Press and hold the FORCE
RECOVERY button: while pressing the FORCE RECOVERY button, press and release the
RESET button; wait two seconds and release the FORCE RECOVERY button.; For the
location of the buttons, refer to Chapter 2 Hardware Information.
5. When device is in recovery mode, lsusb command on host will list a line of "NVidia
Corp"
Summary of Contents for BOXER-8130AI
Page 17: ...Compact Fanless Embedded AI Edge Box PC BOXER 8130AI Chapter 2 Chapter 2 Hardware Information...
Page 33: ...Chapter 2 Hardware Information 21 Compact Fanless Embedded AI Edge Box PC BOXER 8130AI...
Page 37: ...Compact Fanless Embedded AI Edge Box PC BOXER 8130AI Chapter 3 Chapter 3 OS Flash guide...