background image

ii

E9749

First Edition

November 2014

Copyright Notice

This document is copyrighted, 2014. All rights are reserved. The original 

manufacturer reserves the right to make improvements to the products described 

in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted 

in any form or by any means without the prior written permission of the original 

manufacturer. Information provided in this manual is intended to be accurate and 

reliable. However, the original manufacturer assumes no responsibility for its use, 

or for any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to 

change without notice. While reasonable efforts have been made in the preparation 

of this document to assure its accuracy, the original manufacturer assumes no 

liabilities resulting from errors or omissions in this document, or from the use of the 

information contained herein.

The original manufacturer reserves the right to make changes in the product 

design without notice to its users.

Acknowledgments

All other products’ name or trademarks are properties of their respective owners.

• 

AMI is a trademark of American Megatrends Inc.

• 

Intel

®

, Core™ are trademarks of Intel® Corporation.

• 

Microsoft Windows

®

 is a registered trademark of Microsoft Corp.

• 

IBM, PC/AT, PS/2, and VGA are trademarks of International Business 

Machines Corporation.

The original manufacturer reserves the right to make changes in the product 

design without notice to its users.

All other product names or trademarks are properties of their respective owners.

Summary of Contents for EMB-Q87B













































Reviews: