Chapter 2 Installation
17
Clear CMOS Selection (JP1)
Safety precautions in setting up clear CMOS must be taken, always
place jumper on
protect mode
. In clearing CMOS, place jumper for
just a second (
follow clear CMOS illustration
) then, immediately
return jumper to
protect mode
.
*
Protect Clear CMOS
1 2 3 1 2 3
*
Default
LCD Panel Voltage Setting (JP6)
The LCD panel driving voltage is set by using JP6 jumper settings
illustrated as follows:
5V
*
3.3V
1 2 3 1 2 3
* Default
