background image

Quick Installation Guide

MB-662   Installation Guide    

1

  MB-662

Part no. 2007662001   2nd. Ed.   Printed in Taiwan   Feb., 2001

Quick Installation Guide

Warning!

Always completely disconnect the power cord

from your chassis whenever you work with the

hardware. Do not make connections while the

power is on. Sensitive electronic components can

be damaged by sudden power surges. Only

experienced electronics personnel should open

the PC chassis.

Caution!

Always ground yourself to remove any static

charge before touching the CPU card. Modern

electronic devices are very sensitive to static

electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all

electronic components in a static-dissipative

surface or static-shielded bag when they are not

in the chassis.

MB-662

N o t i c e :

The guide is designed for experienced users to

setup the system within the shortest time.  For

detailed information, please always refer to the

electronic user's manual.

Safety Precautions

MB-662

LPX Board Socket 370 Pentium III

with LCD, LAN, Audio, 4 COMs & SSD

Summary of Contents for MB-662































Reviews: