Chapter 2 – Getting Started
10
Ru
gg
ed
Tab
let
C
omp
uter
RT
C-
600A
2.2 Notes Before Use
Before using your device, please read through the following instructions
Use only the power adapter that comes with your device. Using a
different
power adapter may cause damage.
The AC cable is designed for the RTC-600A only
Using a power outlet is the best way to charge your device (refer to section 1.2
for the adapter’s voltage output and acceptable input)
When using the RTC-600A for the first time, fully charge the battery for up to 8
hours. If the device is inactive, charging the battery once per month is
recommended to prevent deterioration.
There are two batteries in the RTC-600A: Battery 1 is internal while battery 2 is
swappable by the user (both batteries can be monitored at the title bar). Charge
the device once battery 1 drops below 20%
Always allow your battery to be fully charged before use. Calibrating the battery
before use is also highly recommended.
To prolong battery life, allow a fully charged battery to discharge more than
95% before recharging
The RTC-600A CANNOT be charged via an USB connection.
The IP65 waterproof protection may get damaged when subjected to shocks
greater than levels tested in MIL-STD-810G Method 516.6 Procedure IV. The
protection may also be affected if the rubber connector fails to cover or close
firmly.
Summary of Contents for RTC-600A-TAD-WBGLR-6101
