F u l l s i z e C P U C a r d
S B C - 8 6 0
Chapter3 Award BIOS Setup
3 - 23
Select Enabled when you use a Universal Serial Bus
(USB) keyboard/Mouse under DOS mode.
The choices: Disabled, Enabled.
ü
Onboard Audio/LAN 1/LAN 2
The default setting for this item is "Enabled". If you
don't utilize onboard LAN / Audio funciton, just
configure it as "Disabled" without any efforts on jumper
setting.
The choices: Disabled, Enabled.
ü
Init Display First
You can select Onboard/AGP or PCI slot to initialize it
as the primary display before initializing any other
display device on the system.
The choices: Onboard/AGP, PCI Slot,
ü
IDE HDD Block Mode
Block mode is also called "block transfer", "multiple
commands", or "multiple sector read/write". If your
IDE hard drive supports block mode (most new drives
do), please select "Enabled" for automatic detection of
the optimal number of block read/writes per sector the
drive can support.
The choices: Disabled, Enabled.
