F u l l s i z e C P U C a r d
S B C - 8 6 0
Chapter3 Award BIOS Setup
3 - 34
ü
Reset Configuration Data
Normally, you leave this field disabled. Select enabled to
reset Extended System Configuration Data (ESCD)
when serious conflict is caused by add-on device or
system reconfiguration.
The choices: Enabled, Disabled
ü
Resources Controlled By
The Award Plug and Play BIOS has the capacity to
automatically configure all the boot and Plug and Play
devices. If you choose Auto, you cannot select IRQ
DMA and memory base address fields, since BIOS
automatically assigns them.
The choices: Auto (ESCD), Manual
.
ü
IRQ Resources
When resources are controlled manually, assign each
system interrupt a type, depending on the type of device
using the interrupt. There are two types for choice:
Legacy ISA and PCI/ISA PnP.
Legacy ISA
: Devices compliant with the original PC
AT bus specification, requiring a specific interrupt (such
as IRQ4 for serial port 1)
PCI/ISA PnP
: Devices compliant with the Plug and
Play standard, whether designed for PCI or ISA bus
