background image

 

6                                                              

 

ArrestAll 

 

© 2015 American Air Filter Company, Inc. Any use of the text or images 

this document contains, without permission of American Air Filter 

Company, Inc., is prohibited. ArrestAll, AAF, REDClean, REDFiltration, 

and Reliable Efficient Durable are registered trademarks of American Air 

Filter Company, Inc. d/b/a AAF International. 

 

 

All personnel shall receive safety training specific to the site, the task, and the 

conditions under which the work will be conducted. 

 

All personnel shall be equipped with appropriate safety apparel and 

equipment, such as clothing, footwear, hard-hats, gloves, ear protection, eye 

protection, and safety harness. 

 

All personnel involved in any stage of the process shall have been trained for 

the tasks in which they will be involved and at all times shall be under the direct 

supervision of experienced supervisors and managers. 

 

All personnel shall be equipped with appropriate tools and equipment to safely 

and efficiently complete their task. 

 

Adequate lighting shall be supplied at all times while work is being conducted. 

 

A work perimeter shall be set up to define the limits of the area within which 

the work will be conducted and outside which there will be no threat to the safety 

of personnel or plant. The perimeter shall be taped-off and marked appropriately 

to prevent accidental ingress of uninvolved personnel or equipment. When the 

work area impedes into existing access ways or traffic routes for which no practical 

alternative is available, barriers, wardens and flaggers shall be employed to safely 

control crossing traffic and personnel. 

 

At any time only those personnel directly involved in completing the task at 

hand shall be allowed within the work perimeter. 

 

2.3

 

Dust explosions 

Dust explosions constitute a serious industrial hazard and may result in 

death, serious injury, and/or devastating property damage. It is the responsibility 

of the user to identify the nature of the dust and whether or not it poses an 

explosive hazard  and to properly mitigate this hazard. Except as otherwise 

expressly provided in writing, AAF makes no representation or warranty in 

connection with explosion hazard equipment, including, but not limited to, the 

necessity or effectiveness of explosion hazard equipment or to the design, 

installation, operation, and performance of such equipment. The basic standard for 

dealing with explosive dust applications is from the National Fire Protection Agency 

(“FPA”),  NFPA 69: Standard on Explosion Prevention Systems. This  standard 

applies to the design, installation, operation, maintenance, and testing of systems 

Summary of Contents for ArrestAll AR 1-3 FB

































Reviews: