5
Transport
Deliveries are to be immediately checked in the presence of the carrier as being intact and complete.
Units must be properly transported. Improper transport can lead to:
• Impeller interference with inlet ring
• Motor shaft deformation
• Bearing damage
Unpacking
• Carefully remove the unit from the shipping carton and inspect for any damage that may have
occurred during transportation. Two workers minimum are required to lift the unit from the
container.
• Remove housing from shipping carton and inspect for concealed damage and any hardware that
may have become loose in transit.
• If RSR configuration is ordered, the RSR Adaptor frame and grill will be shipped in a separate
shipping carton and will need to be inspected for concealed damage and any hardware that may
have become loose in transit.
• The grill for the RSR Adaptor should be set aside. It is good practice to label or mark the grill and
trim components to match with the respective unit to ensure a good fit.
Fig 1: Unit Unpacking
EQUIPMENT OVERVIEW
