CLEANING
Clean the external surfaces of the boiler regularly to maintain good hygiene
Empty the front drip-tray regularly
Wipe external surfaces of the boiler with a damp cloth. Do not use abrasive materials on the outer surfaces.
MAINTENANCE & SERVICE INFORMATION
Descaling:
The boiler should be periodically checked for scale build-
up…see below:
In hard water areas, the boiler should be descaled on a regular basis to maintain efficient operation, minimise
energy consumption, and also retain the water quality.
To de-scale:
-
Disconnect machine from power supply and allow to cool
-
Insert a flat blade between lid and casing and twist to pop off the outer-lid.
-
Remove tank-lid (four fixing screws).
-
Lift out the evaporation plates (inside of tank
–
Remember order of removal).
-
Remove as much scale as possible by hand. Any scale which is difficult to remove can be dissolved by
using a de-scaling solution.
-
Wipe clean the level sensing probes.
-
Flush with copious amounts of cold water to ensure all traces of de-scaler are removed before using
the boiler again.
-
Replace evaporation plates, tank-lid and outer lid.
SERVICE/TECHNICAL SUPPORT & SPARES:
Tel: 01635 202489
To ensure your service enquiry is handled as efficiently as possible, please have the following information
available;
-
Brief description of problem
-
Product Type (model)
-
Serial Number (label on right-hand side of machine). This is essential
For spare parts, filters and other accessories: Tel: 01635 202489
