3
1.
GETTING STARTED
To get your pedal up and running you need a standard 9V DC, 2.1 mm plug, center negative power
supply (minimum 250 mA). You will find the connector at the back of your pedal.
The pedal supports both mono and stereo connections. Combinations of these will lead to
different properties in the output signal. See chapter
7. Input/output setups
(page 11) for further
explanations.
2.
CONTROLS
SIZE
From small room to an extreme big hall sound
EQ
Low Pass Filter to change between a bright tone to a darker reverb
tone
MIX
Dry/wet mix: from completely dry sound to completely wet reverb
sound
FX SELECT (ALT)
-
FX-SELECT – Choose active effect parameter (
SIZE, EQ or MIX
)
for wireless control with AERO controller (optional)
-
ALT – lets you change between two modes for the ROM pedal,
press and hold the FX-SELECT footswitch to toggle between
the two modes: