Subwoofer Wiring Diagrams
DC2 Subwoofers are Dual Voice Coil (DVC), meaning they have two positive and negative terminals
per speaker. The voice coils can be wired in parallel or series or a combination of both. The
subwoofer should be wired to match the amplifiers lowest impedance as stated by the amplifier
manufacturer. Going below the amplifiers minimum impedance may damage the amplifier, so wire
carefully. For wiring subwoofers, we recommend using 12- to 16-gauge wire.
SINGLE SUBWOOFER SYSTEM
WIRED IN PARALLEL
DUAL SUBWOOFER SYSTEM
WIRED IN PARALLEL
SINGLE SUBWOOFER SYSTEM
WIRED IN SERIES
DUAL SUBWOOFER SYSTEM
WIRED IN SERIES - PARALLEL
DC210D2 = 1 OHM
DC210D4 = 2 OHM
DC210D2 = 1/2 OHM
DC210D4 = 1 OHM
DC210D2 = 4 OHM
DC210D4 = 8 OHM
DC210D2 = 2 OHM
DC210D4 = 4 OHM
300W
RMS power
600W
MAX POWER
HIGH PERFORMANCE SUBWOOFER
DUAL 2 OHM
VOICE COILS
HD1
10D4
300W
RMS power
600W
MAX POWER
HIGH PERFORMANCE SUBWOOFER
DUAL 2 OHM
VOICE COILS
HD1
10D4
300W
RMS power
600W
MAX POWER
HIGH PERFORMANCE SUBWOOFER
DUAL 2 OHM
VOICE COILS
HD1
10D4
300W
RMS power
600W
MAX POWER
HIGH PERFORMANCE SUBWOOFER
DUAL 2 OHM
VOICE COILS
HD1
10D4
300W
RMS power
600W
MAX POWER
HIGH PERFORMANCE SUBWOOFER
DUAL 2 OHM
VOICE COILS
HD1
10D4
300W
RMS power
600W
MAX POWER
HIGH PERFORMANCE SUBWOOFER
DUAL 2 OHM
VOICE COILS
HD1
10D4
