Operators and Maintenance Manual
Measuring module
EMS DAQ R02.01
Page
3/18
Copyright:
Auto & Aero Technologies Sp. z o.o.
Mazowiecka 10/5, 20-723 Lublin, Poland
■
email: info@aatech.pl
■
www.aatech.pl
Introduction
This engine monitoring module EMS DAQ R02.01
is intended for ultralight,
microlight, homebuilt and experimental aircraft. This module is not
certified by the FAA and EASA. Fitting of this module to a certified aircraft
is subject to the rules and conditions pertaining to such in your country.
Please check with your local aviation authorities if in doubt.
This engine monitoring module EMS DAQ R02.01
is an element of the
Integrated Avionics System that measures the following engine operation
parameters:
a)
Engine speed;
b)
Rotor speed;
c)
Inlet air pressure;
d)
Inlet air temperature;
e)
Oil pressure;
f)
Oil temperature;
g)
Cylinder head temperature;
h)
Exhaust gases temperature;
i)
Fuel level;
j)
Pitch and roll trim position.
The purpose of EMS DAQ R02.01 type measuring module is to collect input,
analyse it in terms of threshold levels, and record selected information.
Measured values are communicated to the pilot by means of the following
displays type EEM MOT 01 FE…
.
Functionalities of the module include:
a)
analysing and recording instances of crossing thresholds of
operating parameters,
b)
providing records and statistics on how often, to what extent and
for how long parameter values were outside the desired range;
