AD4412-CW
19
3.2.
Product length
1. Display
the product edit screen in the same way as “3.1. Speed” described previously, and then touch the Detect
Parameter button on the “Detect Function” tab to display the weighing parameter setting screen.
2. Set an appropriate length for products to be conveyed in the field “Product Length” on the “Weighing Parameter
Setting 1” tab.
The product length is used for continuous unsplit detection. (Setting it to a value longer or shorter than the products to
be conveyed may cause a detecton error.)
Fig. 27
Detect parameter setting screen
Fig. 28
Setting the product length