5
Using a USB Flash Drive
- 5.2
Storing the Results and the History
34
55.2.2.
Storing the Inspection History and the Operation History
Both are stored in USB memory with a csv format file.
In the case of the inspection history, a new file is created for each inspection.
In the case of the operation history, a new file is created for each inspection.
Note
User
level
"
Quality Manager
" or higher is required.
1. Connect the USB flash drive to the connector on the display
module.
2. Touch the "
Setting
" icon in the "
Home
" screen to
display the "
Setting
" screen.
3. Touch the "
USB setting
" button in the "
Setting
" screen
(System tab) to display the "
USB setting
" screen.
Set the "
Export inspection history
" to "
Enable
".
4. When the inspection is started, the inspection history is
stored in USB memory.
When the settings are changed, the operation history is
stored in USB memory.
Fig. 443 UUSB Settings Screen
Directory:
Root directory of the USB drive.
File name:
"First Time of Detection".csv
File name:
Working_History_Save.csv
When the beginning of the inspection is "
08/09/2014 13:16:03
", the filename is "20140908131603.csv ".
Time
No.
Type
Table 55 SSymbol of the Inspection Results
In file
On screen
Description
PASS
PASS
Good product is
detected.
FAIL 1
FAIL 1
Basic failure
FAIL 2
FAIL 2
PE sensor, out of range
FAIL 3
FAIL 3
Two product failure
FAIL 4
FAIL 4
Peripheral failure
Fig. 444
Example of
IInspection History
Summary of Contents for AD-4971
