7
Reference Table of Screens and Menu Items
- 7.2
Product Settings Screen (Product Settings Tab)
45
N
No.
N
Name
SScope
D
Description
3-1 Error alarm
Disable, Enable When detecting an error, a DO signal is outputted.
3-2 FAIL stop
Disable, Enable When stopping due to a failure, a DO signal is outputted.
3-3 Inspecting
Disable, Enable When executing the inspection, a DO signal is outputted.
3-4
Init. phase
tracking
Disable, Enable When executing the Init. phase tracking, a DO signal is outputted.
3-5 Motor CW
Disable, Enable When the motor is rotating clockwise, a DO signal is outputted.
N
No.
N
Name
SScope
D
Description
4-1 Motor CCW
Disable, Enable When the motor is rotating counterclockwise, a DO signal is outputted.
4-2 No rotation
Disable, Enable When stopping the motor, a DO signal is outputted.
4-3 Calibration
Disable, Enable When calibrating AD-4971, a DO signal is outputted.
4-4 Setting sensitivity
Disable, Enable When adjusting the sensitivity, a DO signal is outputted.
4-5 CPU run
Disable, Enable When the software is executing, a DO signal is outputted.
N
Note
DO settings cannot be outputted solely by themselves. Set the DO settings with "
7.2.6. DO
Behavior Settings Screen
".
7.2.6.
DO Behavior Settings Screen
2
1
3
Fig. 557 D
DO Behavior Settings Screen
The item can be changed using the "
Up
" and "
Down
" icons.
No.
Name
Scope
Description
1 Delay time
0.00 (0.00 to 99.99 sec.)
The delay time (seconds) from the judgment to the DO signal output.
2 Hold time
0.00 (0.00 to 99.99 sec.)
The width (seconds) of the DO signal.
3 Polarity
Positive, Negative
Logic of the DO signal:
Positive:
When outputting a signal from the DO, the device
connected to "Contact
A
" makes contact with "
ON
".
Negative: When outputting a signal from the DO, the device
connected to "Contact
B
" makes contact with "
ON
".
Summary of Contents for AD-4971
