11
5. BASIC OPERATIONS OF THE KEYS
There are two actions possible when pressing
a key.
1. Press the key and release after the
buzzer sounds
2. Press and hold the key and release after
the buzzer sounds twice
* To prevent errors when making key operations, there is an interval until the buzzer
sounds after pressing the key.
Keys
When the key is pressed
(Until the buzzer sounds one time)
When the key is pressed and held
(Until the buzzer sounds twice)
Prints out the current time.
Puts the printer in the time settings
mode.
Prints out the current date.
Puts the printer in the date settings
mode.
Accesses the printing mode settings.
Prints out the ID code.
Puts the printer in the ID code settings
mode.
Prints out the total.
Prints out the statistical calculation
results.
Deletes one instance of the data to
be used in statistical calculation.
Deletes all of the data to be used in
statistical calculation
.
Feeds paper while the key is
pressed.
Test prints when the power is turned
on while pressing this key with the
power turned off.
Cancels changes at each setting.
Advances to the next setting item when
configuring the function settings.
Transmits a re-zero command. *
The commands can be selected at the
function settings.
Prints out weighing values in the manual
printing mode.
Prints out received weighing values after
transmitting weighing value request
commands (“Q” command) to the device at a
mode other than manual printing mode. *
Confirms the setting changes.
Stops or restarts the chart printing
while printing a chart.
Toggles between the external key
printing mode and dump printing mode.
Completes the chart printing while
printing a chart.
* When connecting using the current loop, the commands cannot be transmitted.
Pi
Pi Pi
