17
4.1. Display and keys
The STABLE indicator turns on to indicate that the parameter displayed is in effect.
Selects a class or item.
Changes the parameter.
When a class is displayed, moves to an item in the class.
When an item is displayed, stores the new parameter and displays the next class.
When an item is displayed, cancels the new parameter and displays the next class.
When a class is displayed, exits the function setting mode and returns to the
weighing mode.
4.2. Function table
Class
Item and Parameter
Description
Environment
Display
Decimal point
position
-
Not fixed
Displays the decimal point position of the
weighing data received.
Fixed
Fixes the decimal point at the set digit.
Even if the minimum display is switched
using the SAMPLE key, the decimal
point position does not change.
For details, refer to “
to
Sample key
function
Disabled
Disables the SAMPLE key function.
Enabled
Enables the SAMPLE key function.
Serial
interface
Baud rate
600 bps
Set the same value as that of the
weighing instrument to be connected.
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
CC-Link
interface
Number of
station
to
Number of
station
CC-Link
baud rate
156 Kbps
Set the same value as that of the
CC-Link master station to be connected.
625 Kbps
2.5 Mbps
5 Mbps
10 Mbps
Factory setting
Summary of Contents for AD-8923-CC
Page 1: ...1WMPD4002124D...
Page 32: ...32 MEMO...
Page 33: ...33 MEMO...
Page 34: ...34 MEMO...
