4
1. INTRODUCTION
This manual describes how the AD-8923-CC remote controller works and how to get the most out of it in
terms of performance.
Read this manual thoroughly before using the AD-8923-CC and keep it at hand for future reference.
1.1. Features
Connecting the AD-8923-CC remote controller to a weighing instrument will enable transmission of RS-
232C weighing data from the weighing instrument to a PLC using CC-Link (
⋆
1).
Displays the weighing data transmitted from the weighing instrument.
Key operations remotely control the weighing instrument (
⋆
2).
Using the CC-Link interface, the AD-8923-CC can receive the weighing data or perform re-zeroing of
the weighing instrument.
Note
⋆
1 The AD-8923-CC CC-Link is a remote device station of CC-Link ver. 1.10.
⋆
2 Entering the function setting mode of the weighing instrument is not available. Available
operations depend on the weighing instrument used. Refer to Table 2 in “
⋆
3 CC-Link is a high-speed field network able to simultaneously handle both control and
information data. With a high communication speed of 10 Mbps, CC-Link can achieve a
maximum transmission distance of 100 meters and connect to 64 stations.
When a CC-Link network is configured using the AD-8923-CC, the maximum number of stations
(or units) will be 42.
Summary of Contents for AD-8923-CC
Page 1: ...1WMPD4002124D...
Page 32: ...32 MEMO...
Page 33: ...33 MEMO...
Page 34: ...34 MEMO...
