5
1.2. Applicable Instruments
The AD-8923-CC functions in two ways as follows, depending on the weighing instrument used:
A remote controller that displays the weighing data and remotely controls the weighing instrument.
A remote display that displays the weighing data.
Available key operations depend on the weighing instrument used. (Refer to “Table 2”)
For weighing instruments not listed in this table, please refer to the A&D website.
Table 1 Applicable weighing instruments and what is required
Weighing instrument
What is required to connect to weighing instrument
Option for the instrument Communication cable (Length: 2 m)
AD-4212C, AD-4212D
None (D-sub 9 pin)
None
(Use the cable provided for AD-4212C
/
D)
*1
AD-4212F
None (D-sub 9 pin)
AX-KO3590-XXX
*2
AD-4212A
/
B, GX, GF, GX-K, GF-K, MC,
GP, GR
None (D-sub 25 pin)
AX-KO1710-200
GX-A, GF-A, GX-M, GF-M, GX-L, GF-L, FZ,
FX, EK-I, EW-i, EK-L, BM, GH,
HR-i, HR-AZ, HR-A
None (D-sub 9 pin)
AX-KO2741-180
EJ, HV-C, HV-CP, HW-C, HW-CP
OP-03 (D-sub 9 pin)
AX-KO2741-180
HV-G, HV-WP, HW-G, HW-WP
None (Din 8 pin)
AX-KO1786-200
FG-L, FG-M
OP-23 (Din 8 pin)
AX-KO1786-200
FS-i, SC, SE, SW
OP-03 (Wire)
AX-KO3285-320
*1 When connecting to the AD-4212C
/
D, use the cable provided as a standard accessory for the
AD-4212C
/
D.
The part number for standard accessory cable for the AD-4212C is AX-KO3590-1000 (10 m).
The part number for standard accessory cable for the AD-4212D is AX-KO3590-200 (2 m).
*2 For “XXX”, choose from 200 (2 m), 500 (5 m), or 1000 (10 m).
Summary of Contents for AD-8923-CC
Page 1: ...1WMPD4002124D...
Page 32: ...32 MEMO...
Page 33: ...33 MEMO...
Page 34: ...34 MEMO...
