AD4329A-DLC
Page 29
7.9. Tare
Tare is a function that saves the current gross value as a tare value and set the net value to zero.
The function is used to display a net value with the container weight subtracted from the total weight if you put an
object into a container to weigh it.
●
Tare execution
When the MD mark is illuminated, pressing [TARE] saves the tare value and the net value is displayed.
●
Tare clear
The tare value is set to 0 by the following operations:
・
Turn off power
・
Pressing [TARE] when the gross
value is 0d.
・
Power-on zero
・
Push zero
7.10. Preset tare
This subtracts a preset tare from the gross value.
If you use the preset tare, set preset tare function (CF-006) to 0: Enable. Default is 1: Disable.
Set the item by the following key operations.
1. Press
[PRESET
TARE].
2. The current preset tare value is displayed with the preset tare mark illuminated.
3. Press [ZERO] to move the flashing digit. Press [TARE] to change the value of the flashing digit.
4. Press [PRINT] to update the preset tare value to go to weighing mode and display the net value.
