AD4329A-DLC
Page 53
12.10. Initializing
The initialization consists of the following three levels.
Initialization of the
parameter
Initializes the push zero value, tare value, total value and accumulation
count.
Initialization of the function Initializes the F function, CF function and comparison values in addition
to the parameter.
Initialization of all data
Initializes the calibration settings in addition to the parameter and
function, and sets the weighing indicator to the factory settings.
Follow the procedure below to initialize the weighing indicator.
＾
Press and hold
Initialization of the parameter
"in"i"t
initra
initfnC
initall
"i"n"i"t"r"a
"i"n"i"t"f"n
"i"n"i"t"a"l
init.ra
init.all
init.fnC
Initialization of the function
0.0
.
CHeCk
CHc
1
"l"C
Off mode
Press and hold
Press and hold
Initialization of all data
