ADF-3200 Installation and Operation Guide
Date : July. 1st. 2013
- 10 -
3. SETUP & OPERATIONS
3-1 PREPARATION BEFORE MOUNTING ON THE PROJECTOR.
The procedure in this section will help installers to set up polarization
modular on to projector and test 3D presentation.
- Before going ahead with this installation, please carefully read the previous
instructions.
- Prepare proper space for installing the system between the projector lens
and polarization window of bestView ADF-3200.
3-1-1 HEIGHT ADJUSTMENT OF POLARIZATION WINDOW
- Unscrew 4 pieces of height adjustment screws to the count clockwise
two or three times.
- Adjust height of polarization window according to the height of
projector lens.
- After adjust the height of polarization window, fasten the adjustment
screws tightly.
Height adjustment screw
set proper height