ADF-3200 Installation and Operation Guide
Date : July. 1st. 2013
- 11 -
3-1-2 CHECK THE PANEL DRIVE CABLE
In order to operate exactly, installers have to check the panel drive
cable. The cable connects between terminal of panel drive signal out
and polarization window panel. The cable connects tightly both sides
with clicking noises.
3-1-3 DESKTOP SETTING
When installers set up projector and polarization modular on the desk,
simply put the projector on the bestView ADF-3200.
In this case, the important thing is that the projector is located with
proper distance from polarization window.
(see 3-1 and 3-2)
Left / Right
left / right moving button
Polarization window must be set front of projector lens with Right / Left
moving button. (When case of ADF-3200A is installed, polarization
window will be able to be moved by remote control transmitter. Button
“2” and “3” can move polarization window to the left and right.)
