BM series
43
Class Item
and
Parameter
Description
off
No limit
t-Up
Timeout
on
1 second
Selects the wait time to receive
a command.
off
No output
5if
Serial
interface
erCd
AK, Error code
on
Output
AK: ASCII code 06h
0
Water temperature
d5
fnc
Density
function
ldin
Liquid density input
1
Liquid density
Available only when density
mode is selected
Unit
Unit
Refer to "
5. Weighing Units
".
C5
in
Internal mass correction
Displayed only when the internal mass value correction
switch is set to
1
. Refer to "
8. Calibration (To Adjust The
Weighing Value)
".
id
ID number setting
Refer to "
11. ID Number And GLP Report
".
0
3 seconds
1
10 seconds
ion
Neutralization time
2
Manual operation (max. 10 min.)
Refer to "
6.5. Built-in DC
Static Eliminator"
".
off
The
ION
key is not used.
8922
AD8922A control
on
Applies the
ION
key to the
MODE
key on AD-8922A.
0
Applies the
key and
RE-ZERO
key.
1
Applies the
key and
ION
key.
ionfnc
Static
eliminator
e-5
External control input
2
Applies the
ION
key and
RE-ZERO
key.
off
No used
door
Door state
function
d-dt
Door sensor
on
Used
Refer to "
6.1. Basic Operation
"
off
No used
locfnc
Password function
on
Used
When turning on the balance,
the password input (
pa55
)
is displayed.
loc
no.
Password
Refer to "
15.2. Changing Password
".
: Factory settings.
10.3.
Description Of The Class "Environment, Display"
Condition (
Cond
)
Cond
0
This parameter is for sensitive response to the fluctuation of a mass value. Used for
powder target mass, weighing a very light sample or when quick response weighing is
required. After setting, the balance displays
FAST
.
Cond
2
This parameter is for stable weighing with slow response. Used to prevent a mass
value from drifting due to vibration or drafts. After setting, the balance displays
SLOW
.
Notes
In automatic response adjustment, this parameter is selected automatically.
Summary of Contents for BM-20
