13
5-6. Counting mode (pcs)
The counting mode determines the number of objects in a sample, using the basic
sample unit mass.
Selecting the counting mode
1. Press the MODE key to select
.
(
: pieces)
Storing the sample unit mass
2. Press and hold the MODE key to enter the
sample unit mass storing mode.
3. Press the PRINT key to select the number of
samples, 5, 10, 25, 50, or 100.
4.
When using a tare (container), place the
container on the weighing pan, and press the
RE-ZERO key. Confirm that the right side of
the number of samples shows zero.
5. Place the number of samples specified in Step 3
on the pan. In this example, 25 pieces.
6. Press the MODE key to calculate and store
the unit mass. Remove the sample. The scale is
set to count objects with this unit mass.
Confirm the zero display
Samples
(25 pieces)
Weighing
pan
Container
Switches the number of
samples
To store
Press and hold
