23
8-4. Storing weighing units
It is possible to store the weighing units that will be actually used from the units
available. For the units available, see “5-2. Weighing units.”
Select and store the weighing units as described below:
1. With the power turned OFF, press and hold the
RE-ZERO key and press the ON/OFF key to turn
the power ON and enter the function setting mode.
func
appears.
2. Press the MODE key several times to display
Unit
.
3. Press the PRINT key.
4. Press the MODE key to change a weighing unit.
5. Press the RE-ZERO key to select the weighing unit.
The STABLE indicator turns on when the weighing unit
has been selected.
6. Repeat Steps 4 and 5 to select all weighing units to be
used.
7. Press the PRINT key to store the units.
id
appears after
end
.
8. Press the ON/OFF key to turn the power OFF or
press the RE-ZERO key.
When the scale is turned ON, it starts with the
weighing unit that was selected first in Step 5.
Switches weighing units
To select
STABLE indicator
To store
Press several times