- 10 -
Reply O
K
,
+ 0 0 1 0 0 0 C L
F
FS-15K
i
: Target weight 1.000 kg will be set.
Set a HI limit value or upper limit weight. (No reply for F20-1.)
F07-0 or F07-1 is set, the command should have “+” and 6 digit number without
decimal point.
Command H I
,
+ 0 0 0 2 0 0 C L
F
Decimal point follows the weight display.
Reply H
I
,
+ 0 0 0 2 0 0 C L
F
FS-15K
i
:
F07-0:
0.200 kg will be set as an upper limit weight.
F07-1:
0.200 kg will be set as a HI limit weight.
F07-2 is set, the command should have “+” and 5 digit number without decimal
point.
Command H I
,
+ 0 0 2 0 0 C L
F
Assume 2 decimal place number.
Reply H
I
,
+ 0 0 2 0 0 C L
F
2.00% will be set as HI limit %.
Set a LO limit value or lower limit weight. (No reply for F20-1.)
F07-0 or F07-1 is set, the command should have “+” and 6 digit number without
decimal point.
Command L
O
,
+ 0 0 0 1 0 0 C L
F
Decimal point follows the weight display.
Reply L
O
,
+ 0 0 0 1 0 0 C L
F
FS-15K
i
:
F07-0:
0.100 kg will be set as a lower limit weight.
F07-1:
0.100 kg will be set as a LO limit weight.
F07-2 is set, the command should have “+” and 5 digit number without decimal
point.
Command H I
,
+ 0 0 1 0 0 C L
F
Assume 2 decimal place number.
Reply H
I
,
+ 0 0 1 0 0 C L
F
1.00% will be set as LO limit %.
Store the comparator limits into the specified memory number. (No reply for F20-1.)
F07-0 is set, the command should have 2 digit memory number and 2 setting values
that have a polarity and 6 digit number without decimal point.
Command M L
,
0 1
,
+ 0 0 1 2 0 0
,
+ 0 0 0 9 0 0 C L
F
Reply H
I
,
0 1
,
+ 0 0 1 2 0 0
,
+ 0 0 0 9 0 0 C L
F
FS-15K
i
: Store upper limit 1.200 kg and lower limit 0.900 kg into
the memory number “01”.
F07-1 is set, the command should have 2 digit memory number, target weight that
has a polarity and 6 digit number without decimal point, and HI/LO limit weight that
has “+” and 6 digit number without decimal point.
