22
5-4-2 Using The Statistical Calculation Mode
Entering data for statistical calculation
Use the following keys to operate the statistical calculation mode.
MODE
key............
When the data is entered, moves between the displaying items (weighing mode,
statistical results and data operation) each time the key is pressed.
When no data has been entered, selects the unit.
SAMPLE
key........
Turns the minimum display on or off, in the weighing mode.
RE-ZERO
key ......
Sets the display to zero in the weighing mode.
key............
Outputs the data number and the weight data and includes the weight data to
statistical calculation in the weighing mode. (Output is not in the data format
specified in the function table because of the data number added.)
Outputs the statistical results while the statistical results are displayed. (Output is
not in the data format specified in the function table.)
CAL
key................
Returns to the weighing mode.
1 Press
the
RE-ZERO
key to set the display to zero.
2 Place the sample on the weighing pan and wait for the
stabilization indicator to turn on.
3 Press
the
key to add the data displayed to statistical
calculation. The number of data on the upper left of the display
increases by 1.
4 Repeat steps 1 to 3 for each weighing.
