85
AX-USB-9/25P-EX: USB converter
Adds a COM port to a PC.
Enables bi-directional communication between the PC and the balance when a USB driver is
installed.
Can use serial communication software such as WinCT on a PC without COM ports.
An RS-232C cable is provided to connect the USB converter to the balance.
AD-1671: Anti-vibration table
Approximately 24kg, Artificial stone (Terrazzo).
Use this table when unstable weighing is caused by vibration coming from the floor.
Use the AD-8922A remote controller to avoid a weighing error by a slight table tilt that key
operation may make.
AD-1672: Tabletop breeze break
Protects the balance from wind from sources such as air conditioning or people passing by,
thereby reducing balance weighing error.
The transparent panel assembly consists of antistatic plastic material that protects the balance
from static electricity.
AD-1683: Ionizer
This ionizer eliminates static electricity to prevent weighing errors caused by electrification during
measurement.
This direct current and windless type is the most suitable for precisely weighing powder, etc.
Small size, light weight
AD-1684A: Electrostatic field meter
This option measures the amount of the static charge on the sample, tare or peripheral
equipment and displays the result.
If those are found to be charged, discharge them using the AD-1683 DC static eliminator.
AD-1689: Tweezers for calibration weight
This option is the same as the tweezers provided as a standard accessory and is used when
calibrating the balance using an external weight.
Summary of Contents for FZ-i WP Series
Page 95: ......