15
5-2. Changing the Units
The units or modes can be selected and stored in the function table. The sequence of
displaying them can be arranged in the function table, so as to fit the frequency of use.
Select a unit or mode and arrange the sequence of display as follows:
Step 1 Press and hold the
SAMPLE
key until
ba5fnc
of the
function table is displayed in the weighing mode, then
release the key.
Step 2 Press
the
SAMPLE
key several times to display
Unit
.
Step 3 Press
the
key to enter the unit selection mode.
Step 4 Specify a unit or mode in the order to be displayed using
the following keys.
SAMPLE
key ...... To display the units sequentially.
RE-ZERO
key ..... To specify a unit or mode. The
stabilization indicator
appears
when the displayed unit or mode is
specified.
Step 5 Press the
key to store the units or modes.
The balance displays
end
and then displays the next
menu item of the function table.
Step 6 Press the
CAL
key to exit the function table. Then the
balance returns to the weighing mode with the selected
unit.
Displays the units
sequentially.
Specify
Select
Press and
hold
To unit
Enter
Store
Return
Summary of Contents for GF-30K
