47
10-8-1. Example
1
Comparison when the weighing data is stable or overloaded, excluding "near zero", upper
limit and lower limit.
Selecting a comparator mode
Step 1 Press and hold the
SAMPLE
key until
ba5fnc
of the function table is displayed,
then release the key.
Step 2 Press the
SAMPLE
key several times to display
Cp fnc
.
Step 3 Press the
key.
Step 4 Press the
RE-ZERO
key several times to display
Cp 1
.
Step 5 Press the
SAMPLE
key to display
Cp in
.
Step 6 Press the
RE-ZERO
key several times to display
Cp in 0
.
Step 7 Press the
key to store the selected mode.
Entering the upper and lower limit values
Step 8
With
Cp Hi
displayed, press the
key. The current setting of the upper
limit value is displayed with all of the digits blinking.
When the current setting is not to be changed, press the
or
CAL
key to
go to step 9.
When the current setting is to be changed, press the
RE-ZERO
key.
The balance is now in the digital input mode. To use the weighing input mode,
press and hold the
MODE
key.
Digital input mode
Change the setting using the following keys.
SAMPLE
key.....To select the digit to change the value.
RE-ZERO
key ...To change the value of the digit selected.
MODE
key........To switch the polarity.
key........To store the new setting and go to step 9.
CAL
key...........To cancel the new setting and go to step 9.
Weighing input mode
Press
the
RE-ZERO
key. The balance displays
0.0
g
. Place a sample, with a mass
that corresponds to the upper limit value, on the pan. Press the
key to
store the upper limit value. Remove the sample. The balance displays
Cp lo
.
Step 9 With
Cp lo
displayed, press the
key. The current setting of the lower limit
value is displayed with all of the digits blinking.
When the current setting is not to be changed, press the
or
CAL
key to go
to step 10.
When the current setting is to be changed, press the
RE-ZERO
key.
The balance is now in the digital input mode. To use the weighing input mode, press
and hold the
MODE
key.
Enter the lower limit value in the same way as described in step 8. Then, go to step 10.
Step 10 Press the
CAL
key to exit the comparator function and return to the weighing mode.
Summary of Contents for GF-30K
