68
Notes
Using the "
PN:mm
" command, the tare value can be recalled.
The tare value recalled can be output using the "
?PT
" command.
The tare value can be changed using the "
PT
:" command.
"
mm
" indicates a two-digit numeral value 01 to 20, which corresponds to
t01
-
t20
.
Weighing input mode
In the weighing input mode, a sample tare container is placed on the pan to store the tare
value.
Note
Pressing
the
CAL
key will interrupt the operation and the
balance will return to the tare value confirmation mode (step 3
in "Storing the tare value").
To go to the digital input mode, press and hold the
MODE
key.
Step 1 The first display in the weighing input mode is the current
weight value and the selected tare number with
PT
blinking.
Step 2 Press the
RE-ZERO
key to set the display to zero.
Step 3 Place a tare (a container) on the weighing pan.
Step 4 Press the
key to store the tare value.
Remove the tare from the pan.
Digital input mode
In the digital input mode, the tare value is entered digitally
using the keys. Use the following keys to store a tare value in
digital input mode.
SAMPLE
key ... To select the digit to be changed.
RE-ZERO
key.. To change the value of the selected digit.
key....... To store the tare value.
Go to step 3 of "12-6-1. Storing the tare value".
CAL
key.......... To return to the tare value confirmation mode.
Go to step 3 of "12-6-1. Storing the tare value".
MODE
key....... Press and hold to go to the weighing input mode.
Tare number
Place container (tare)
on the pan.
Store
Value Digit
Store
Summary of Contents for GF-30K
