70
12-7. Data Memory: Quick Selection Mode
The data memory has a quick selection mode to recall data in memory quickly.
Using the quick selection mode, the comparator settings or the tare value, whichever is
selected in the function table, can be recalled, by a simple operation, using the
MODE
key.
Note
While the data memory function is in use, unit selection using the
MODE
key is not
available.
Use the quick selection mode as follows:
Step 1 Press the
MODE
key to enter the memory data recalling mode.
The memory data last selected appears with all the digits blinking.
Step 2 Press the
MODE
key to select the value.
Comparator settings: when the "Data memory (
data
)" parameter is set to "
4
"
Each time the
MODE
key is pressed, the displayed value changes as follows:
(........
↔
C03
HI
↔
C03
LO
↔
C04
HI
↔
C04
LO
↔
........)
Tare value: when the "Data memory (
data
)" parameter is set to "
5
"
Each time the
MODE
key is pressed, the displayed value changes as follows:
(........
↔
t03
↔
t04
↔
........
↔
t20
↔
t01
↔
........)
Step 3 Press the
key or leave the balance as is for a while (after a few seconds
of inactivity) to confirm the selection. The balance returns to the weighing mode
with the selected data ready for use.
To cancel the selection, press the
CAL
key. The balance returns to the
weighing mode
No.3. Comparator number
Upper limit value
No.3, Tare number
Tare value
Summary of Contents for GF-30K
