Page 42
HV/HW-C/CP Series
13.2. Setting the Clock
The clock can only be set for built-in printer models (Type CP).
Step 1 Turn off the display.
While pressing and holding the TARE key, press the
ON/OFF key to turn the display on and enter function
setting mode.
appears.
Step 2 Press the MODE key several times to display
.
Step 3 Press the ENTER key to enter date confirmation mode.
To set the time without changing the date, press the
MODE key.
- Date setting mode -
Step 4 Press the ENTER key to enter date setting mode.
Set the date using the following keys.
1
M+ key
The blinking digit is moved to the left
PRINT key
The blinking digit is moved to the right
Numerical keys A value can be input at the blinking digit
1
ZERO key
To cancel settings and proceed to step 5.
Step 5 Press the ENTER key after finishing setting. A setting
value is registered, and the scale proceeds to time
confirmation mode after displaying
.
To return to date confirmation mode, press the MODE key.
-Time setting mode -
Step 6 Press the ENTER key to enter time setting mode.
Set time using the following keys.
1
M+ key
The blinking digit is moved to the left
PRINT key
The blinking digit is moved to the right
Numerical keys A value can be input at the blinking digit
1
ZERO key
To cancel settings and proceed to step 7.
Step 7 Press the ENTER key after finishing setting to register
the set value. The scale displays
after
displaying
.
Step 8 Press the
1
ON/OFF key to turn the display off or
press the
1
ZERO key.
Press several times
Date
Use corresponding keys
Time
Use corresponding keys
Summary of Contents for HV-C Series
Page 89: ...HV HW C CP Series Page 87 MEMO...
Page 90: ...Page 88 HV HW C CP Series MEMO...
Page 91: ...13...
