HV/HW-C/CP Series
Page 3
1. Compliance
1.1. Compliance with FCC Rules
Please note that this equipment generates, uses and can radiate radio frequency energy.
This equipment has been tested and has been found to comply with the limits of a Class A
computing device pursuant to Subpart J of Part 15 of FCC rules. These rules are designed to
provide reasonable protection against interference when this equipment is operated in a
commercial environment. If this unit is operated in a residential area it might cause some
interference and under these circumstances the user would be required to take, at his own
expense, whatever measures are necessary to eliminate the interference.
(FCC = Federal Communications Commission in the U.S.A.)
2. Outline and Features
The
HV
-
C
/
CP series are platform scales with
1
/
3000
resolution.
These scales have the triple weighing range function to select the weighing range. The scale
automatically switches to small interval when a light sample is weighed or large interval when a
heavy sample is weighed, depending on the sample weight (multi-interval).
The
HW
-
300KC, HW
-
300KCP, HW
-
600KCP and HW
-
600KC are platform scales with
1
/
6000
resolution. Other HW models are platform scales with
1
/
10000
resolution.
Type CP scales are equipped with a built-in printer.
Type C scales use batteries or an AC adapter as a power source.
The scales use a backlit liquid crystal display to enable viewing in dim light.
Using the optional RS
-
232C serial interface or USB interface, data can be output to a printer.
Also, the weighing value can be output, the scale can be controlled or the setting value can be
set by a command from a personal computer.
The counting mode converts the total mass value (total weight) of articles to a count when each
article has the same mass value.
The scale has an accumulation function with a maximum of
6
digits, which can accumulate up
to
999
times. (The number of times weighed and the total mass value can be stored in the
scale.)
The comparator function compares the displayed weighing value against preset limit values and
displays the result. The result can be output by a buzzer if optional HVW
-
04C is installed.
An
optional
RS
-
232C serial interface, USB interface or comparator relay output can be installed
up to three units into the scale.
Summary of Contents for HV-C Series
Page 89: ...HV HW C CP Series Page 87 MEMO...
Page 90: ...Page 88 HV HW C CP Series MEMO...
Page 91: ...13...
