Page 52
HV/HW-C/CP Series
15.2. Parameter List
For the HV
-
C/CP series NTEP/Measurement Canada version, the shaded items in the below table
cannot be changed by the user, so these items are not displayed.
Class Items Parameter
Details and usage
All the keys function.
The
ON/OFF
,
ZERO
,
TARE
,
HOLD
,
M+
and
keys function.
Key lock
The
ON/OFF
,
ZERO
and
TARE
keys function.
OFF
After
5
minutes
After
10
minutes
After
15
minutes
After
30
minutes
Automatic
power off
After
60
minutes
When a stable weighing value is displayed and
no operation is made, the scale is automatically
turned off after time of the parameter has past.
OFF
Automatic
power on
ON The scale automatically turns the power on by connecting
to the power using the AC adapter.
OFF
Zero tracking
ON
±
0.5
digit
±
1
digit
Stability band
width
±
2
digits
0.5
seconds
1.0
second
Stability band
time
1.5
seconds
Condition for lighting stability mark
:
Factory settings for stability mark is "within
±
0.5
digits" and "within
1.0
second".
Fast response / sensitive to vibration Weighing at good environment
Weighing
stabilization
level
Slow response / stable weighing
For stable weighing
Always
turned
off
Always
lit
Turns off
5
seconds after stabilizing
Turns
off
10
seconds after stabilizing
Turns
off
15
seconds after stabilizing
Back light
control
Turns
off
30
seconds after stabilizing
Dark
Back light
brightness
Bright
Dot(
.
)
Decimal point
Comma(
,
)
OFF
Automatic tare
ON
: Factory settings
"
near zero
" is within
±
4
digits (four times the minimum weighing value that can be weighed)
from zero point in the weighing unit "kg".
"
digit
" is equivalent to minimum weighing value in the unit "kg".
Summary of Contents for HV-C Series
Page 89: ...HV HW C CP Series Page 87 MEMO...
Page 90: ...Page 88 HV HW C CP Series MEMO...
Page 91: ...13...
