Page 56
HV/HW-C/CP Series
Class Items Parameter
Details and usage
Stream mode (commands)
Output by command from OP-ch1 or OP-ch2.
Output by command from OP-ch1.
Output by command from OP-ch2.
Commands to be
output are as follows
:
Q, A, N
■
Command is output by the
key.
Output data at auto-print setting,
+
5
digits or more and stabilization
(commands)
Output data at auto-print setting,
+
5
digits or more, or
-
5
digits or less
and stable (commands)
Output data at auto-print setting,
+
5
digits or more and stable when
the comparator is OK (commands)
Output data at auto-print setting,
+
5
digits or more, or
-
5
digits or less
and stable when the comparator is OK (commands)
Output mode
2 (OP-ch2)
Print an accumulation value when the accumulation operation is
made (commands)
■
Do not output the date and time
Output time (ESC T)
2
Output date (ESC D)
2
Output date and time (ESC D,ESC T) 2
Parameter available when
connecting AD-8121B or
AD-8127.
Output time (RTC)
1
Output date (RTC)
1
Time and
date adding
(OP-ch2)
Output date and time (RTC)
1
Parameter available when
built-in printer is used.
■
Do not output the ID number.
ID number
adding
(OP-ch2)
Outputs the ID number.
■
Do not output
Output (ESC D, ESC T output)
2 Format of AD-8121B or AD-8127
Output (DATE,TIME output)
General format
GMP output
(OP-ch2)
Output (RTC output)
1
: Factory settings
1 RTC
:
Built-in clock. Parameter available for type CP.
2 ESC D, SEC T
:
The time and date uses the calendar function of the AD-8121B and AD-8127.
Use the "
dump print mode
" of the AD-8121B and AD-8127.
"
digit
" is equivalent to minimum weighing value in the unit "kg".
Summary of Contents for HV-C Series
Page 89: ...HV HW C CP Series Page 87 MEMO...
Page 90: ...Page 88 HV HW C CP Series MEMO...
Page 91: ...13...
