Page 22
HV-WP/HW-WP Series
8. Counting Mode
8. Counting Mode
The counting mode is the function to convert the total mass value (total weight) of
articles to a count, when each of these articles assume the same mass value.
It is necessary to store a unit mass to count articles.
Even if the AC adapter or the batteries is removed, the unit mass is maintained in
non-volatile memory.
8.1. Storing a Unit Mass
Step 1 Press the
MODE
switch to display the unit .
Step 2 Press the
SET
switch to enter the mode to store a
unit mass.
Step 3 Press the
∧
switch to select the number of
samples. The greater the quantity of samples, the
greater the accuracy of the count.
5 pieces, 10 pieces, 20 pieces, 50 pieces, 100 pieces
Step 4 Put a container item on the weighing pan.
Press the
TARE
switch.
Step 5 Put in samples of number selected at step 3.
Press
the
ENTER
switch to store it after the satbility
mark is displayed. Then the count is displayed.
Caution
When the sample is too light and it is not possible
to calculate a unit mass, the scale displays
lo ut
and returns to step 3. Increase the number of
samples. It is necessary to have more than 5 digits
in the unit of kg to weigh a sample.
When the unit mass is too light to store, the scale
displays
lo ut . .
In this case, the unit mass will not be
stored even if the number of samples is increased.
Pressing
the
ENTER
switch after
lo ut
.
is
displayed, the next unit is displayed.
Step 6 Remove all things from the weighing pan.
Counting mode
STABLE
STABLE
STABLE
Number of samples
Zeroing value
Counts
Pan
A container(bowl)
STABLE
Note
The pan shape depends
on the scale model.
Summary of Contents for HW-200KV-WP
Page 72: ...Page 70 HV WP HW WP Series MEMO...
