Page 30
HV-WP/HW-WP Series
11. Upper/Lower Comparator Function
Function table
Meaning and purpose
A
f6 7
When the display value becomes stable and not nearly-zero, the
scale compares the value. It does not compare on an unstable
condition.
A
A
Caution
The upper limit value (HI) must be greater than the lower limit value (LO).
The parameters of the upper limit value (HI) and the final value (HI) use the
same memory. The parameters of the lower limit value (LO) and the
preliminary value (OK) use the same memory.
The upper/lower comparator function, the simple batch function and the
full/dribble batch function can not be used at the same time because these
parameters use common memory.
11.1. Preparation (Setting Parameters)
Step 1 Turn off the display.
Press
the
ON/OFF
switch while the
ZERO
switch is
pressed and held. The function table is displayed.
Step 2 Press the
ENTER
switch to display an item of the
comparator function (
f6
).
Step 3 Select a parameter of the comparator function
(
f6 0
~
f6 7
) with the
∧
switch.
Step 4 Press the
ENTER
switch and the
F
switch to display
end
. Press the the
ENTER
switch to return to the
normal weighing mode.
Summary of Contents for HW-200KV-WP
Page 72: ...Page 70 HV WP HW WP Series MEMO...
