10
MS-70 / MX-50 / MF-50 / ML-50
The analyzer is equipped with a serial interface as standard. It can be connected to
a printer or computer.
The analyzer can calibrate the weighing sensor (Use special mass.) and drying
temperature (Use temperature calibrator for MS-70 and MX-50 except MF-50 and
ML-50). The analyzer can output the data required at GLP, GMP and ISO at the end
of the calibration.
The analyzer has a self check function that can detect function errors.
The analyzer displays the current change of moisture content per minute [%/ min] in
real-time. It can be used for the reference to find the analyzing mode.
The sample pans can be used repeatedly.
The sample pans and the disposable aluminum foil pans are included in the
standard accessories.
There is a test sample that is used to check the moisture accuracy. (The test sample
is a part of the standard accessories except for the ML-50)
The glass fiber sheets can be used for quick and precise measurement of a liquid
sample. (The glass fiber sheets are a part of the standard accessories except for
the ML-50)
A reference card is built into the bottom of the analyzer.
Principle and Use
The moisture analyzer, based on the principle of thermogravimetric analysis, dries a
sample using a halogen lamp and obtains the moisture content in % and other
results by the difference between the wet weight and dry weight.
