MXMF.Users.Handbook.V2.20.doc
LIT:MXUHB April 2003
18
-
-
?
RsTemp
?
RsFig
Software
Details
RsFig processes data received from MX-50 and MF-50 through RS-232C into graphs
during measurement. Users are able to observe the entire process of change and how
it converges (convergence process).
Overlapped display of multiple graphs is also possible. Processes of measurements
performed repeatedly under different heating temperatures could be displayed in a single
graph. Data could be stored in CSV files.
A useful software for examining
measurement conditions of moisture content.
RsTemp automatically determines optimum heating temperature for measurement of
moisture content, by raising heating temperature of MX-50 and MF-50 every 5minutes by
20C, from 100C to 200C. Heating temperature is automatically determined in about
30min.
Moisture content (M) and moisture loss (dM/dt) is displayed in graphs during operation
(measurement). Data could be stored in CSV files.
RsTemp is a software useful for examining heating temperature most suitable for
samples.
*
Patent pending.
3. Windows TM communication software: WinCT-Moisture
“WinCT-Moisture”
, in combined use with heating and drying method moisture analyzer MX-50 and MF-50,
manufactured by A&D, enables easy transfer of measurement data to PC through RS-232C for storage
and analysis.
WinCT-Moisture
(CD-ROM) is a standard accessory attached to MX-50, but it could also be obtained on
its own under accessory No. AX-42
WinCT-Moisture
, includes four operation modes:
(1) Data transmission softwares
?
RsFig
???
designed for graphic display of moisture content measurement procedure and results.
?
RsTemp
???
designed to automatically determine heating temperature of samples
?
RsCom
???
data transmission software
?
RsKey
???
data collection into other application software
?
RsKey
?
RsCom
Data could be transmitted between MX-50/MF-50 and PC, through RS-232C. RsCom is
a software useful for operating MX-50/MF-50. Data could be stored in text files. GLP
output data could be received from the moisture analyzer.
Output data from MX-50 and MF-50 can be transferred to commercial application
software (Microsoft Excel, etc.) through RS-232C.
Output can be automatically entered in the same manner as with keyboard operation.
Transferable to various types of applications, such as Excel, Text Editor (Word, notepad),
etc. GLP output data could also be received from the moisture analyzer.
