A&D UA-705, Instruction Manual

English  7

Measurements 

Measurement With Storing Data 

1.  Place the cuff on the arm (preferably the left 

arm). 

Sit quietly during measurement. 

2. Press 

the 

 START 

 button.  

 The buzzer sounds and the average 

blood pressures and the WHO 

classification and last data number are 

displayed briefly. 

 When the " 0 " is flashing, the device is 

ready for measurement. If the   mark is 

displayed, the cuff has some air trapped 

in it. Press the exhaust valve button until 

the    mark is displayed. 

3.  Pressurize the cuff by squeezing the rubber 

bulb. 

 A pressure bar indicator and the current 

pressure are displayed. 

 Stop squeezing the rubber bulb when the 

 mark disappears. 

Note: If you want to stop inflation at any time, 

stop squeezing the rubber bulb and 

press the exhaust valve button to expel 

the air from the cuff. 

4.  When inflation is complete, deflation starts 

automatically and the buzzer sounds and 

the 

  (heart mark) blinks, indicating that 

the measurement is in progress. Once the 

pulse is detected, the mark flashes and 

the buzzer sounds with each pulse beat. 

5.  When the measurement is complete, 

the buzzer sounds and the   mark is 

displayed. The systolic and diastolic 

pressure readings and pulse rate are 

displayed and stored. 

6.  Press the exhaust valve button to 

completely release air from the cuff. 

 When a measurement is made with 

insufficient pressure, the   mark will 

be displayed. Re-pressurize the cuff. 

Stop squeezing the rubber bulb when 

the   mark disappears.