A&D UA-705, Instruction Manual

English  8

 When a measurement is made with an 

erratic pulse or in a very noisy 

environment, 

will display. 

7.  Turning the power off 
 Press 

the 

 START 

  button to turn the power off.   

The device will be in standby mode. 

8. Subsequent 

measurements 

If a subsequent measurement is required, turn off the power and turn it on 
again. When "0 " is displayed, the device is ready for another measurement. 

Note:  Allow at least three minutes between measurements on the same 

person. 

9.  Automatic power-off function 

If the device is left on after a measurement, it will turn off automatically 

after about one minute. It may be turned off at any time by pressing the 

START 

 button. 

Notes For Proper Measurement 

 Sit down in a comfortable position. Place the arm to be used for the 

measurement on a table or other support so that the center of the cuff will be 
at the same height as your heart. 

 Relax for about five or ten minutes before taking a measurement. If you are 

excited or depressed by emotional stress, the measurement will reflect this 
stress as a higher (or lower) than normal blood pressure reading and the 
pulse reading will usually be faster than normal. 

  Your blood pressure varies constantly, depending on what you are doing and 

what you have eaten. What you drink can have a very strong and rapid effect 
on your blood pressure. 

 This device bases its measurements on the heartbeat. If you have a very 

weak or irregular heartbeat, the device may have difficulty determining your 
blood pressure. 

 Should the device detect a condition that is abnormal, it will stop the 

measurement and display an error symbol. Refer to page 4 for the 
descriptions of the symbols. 

 This blood pressure device is intended for use by adults only. Consult with 

your physician before using this device on a child. A child should not use this 
device unattended.