14
Maintenance
Do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged. If you
cannot fix the problem using the troubleshooting instructions, request service from your dealer or from the A&D
service group. The A&D service group will provide technical information, spare parts and units to authorized dealers.
The device was designed and manufactured for a long service life. However it is generally recommended to have
the device inspected every 2 years, to ensure proper functioning and accuracy. Please contact either your
authorized dealer or A&D for maintenance.
Technical Data
Type UB-510
Applied part Cuff Type BF
Useful life
Device: 5 years (when used six times a day)
Measurement
method
Oscillometric measurement
Clinical test According to ANSI / AAMI SP-10 1992
Measurement
range
Pressure:20 – 280 mmHg
Pulse: 40 – 180 beats / minute
EMC
IEC 60601-1-2: 2007
Measurement
accuracy
Pressure: ±3 mmHg
Pulse: ±5%
Memory
Last 30 measurements
Power supply 2 x 1.5V alkaline batteries (LR03 or AAA)
Operating
conditions
+10°C to +40°C / 15%RH to 85 %RH /
800hPa to 1060 hPa
Number of
measurements
Approx. 400 measurements, when AAA alkaline
batteries are used, with pressure value of
170 mmHg at room temperature of 23°C
Transport/
storage
conditions
-10°C to +60°C / 15%RH to 85 %RH
Wrist
circumference 13.5 – 21.5 cm
Dimensions Approx. 63 [W] x 56 [H] x 21 [D] mm
Classification
Internally powerd ME equipment (Supplied
by batteries)
Continuous operation mode
Weight
Approx. 82 g, excluding the batteries
Note: Specifications are subject to change for improvement without prior notice.
EMC table information is listed on our website:
http://www.aandd.jp/products/manual/medical/emc_en.pdf
