Page 18 May 2014 – TD 293 OPERATING MANUAL – SmartGuard 5100/5120/5300/5320
Figure 3-4 Selecting port settings
3.2.1
Connection using USB
Figure 3-5 Connection via USB
•
Write a name in the
Connection Name
box.
•
Select
SmartGuard USB
from the
Port Settings
drop down menu
•
Press
Open Port
and the connection to the SmartGuard should be established within a few
seconds. (If not make sure that “Windows Mobile Device Center” or “Microsoft ActiveSync is
installed on your PC.
