May 2014 – TD 293 OPERATING MANUAL – SmartGuard
Page 67
•
Chart Settings
: Open a chart settings window where you can specify the view range of the X- and Y-axis,
grid lines, left/right Y axis location, and graph line color. You can also set the
Max data points
to be drawn
before the oldest data are removed.
Note! Displaying a large number of data points (500 – 1000) may affect the computer performance,
depending on the actual recording interval.
•
Adjust Chart Range To Data
: Adjust the Y axis range to the current dataset. Because of performance
considerations, this is not automatically repeated when new data arrives. If subsequent data points are
located outside the chart range, select this option again to readjust the range.
•
Set Default Chart Range
: Set the Y axis range to the default value.
•
Zoom Series
: Select which data series to zoom when operating the mouse inside the chart area.
•
Save As
: Save a snapshot of the current view to file.
•
Clear All Data Points
: Clear all data points and start drawing from the next data message.
8.3
Data storage on SD card
Recorded data can be stored on an SD card inserted on the front panel of SmartGuard. Select to store
recorded data in the
Multi Group Recorder
panel, refer chapter 4.1.1.
SmartGuard stores one data file for each recording session and each recording group. To subsequently view
and analyse the recorded data use
AADI Real-Time Data Format Converter
to convert the data file(s) into
excel format and use Excel.
The data format is binary but flexible and can also be extracted to AADI Real-Time Output XML format.
Each recording session is assigned a folder referring to the date (YYYYMMDD) and time (HHmm) when the
recording started:
DataSessions_YYYYMMDDHHmm
Within each recording session folder the files for the recording groups are denoted
GroupN_YYYYMMDDHHmm
, referring to the date and time as above. N is the recording group number (0, 1
or 2).
8.4
Event log data storage on SD card
During execution of the internal software on SmartGuard a number of internal events are monitored. If the
SD card is inserted these events are logged to files in the root folder.
8.5
On-line retrieval of files from SmartGuard using FTP
You can utilize an external FTP client to transfer files between SmartGuard and the PC through the AADI
Real-Time Collector.
