INSTALLATION PROCEDURES
Your A&I tractor canopy will fit Roll Over Protection Systems (ROPS) that are 27” to 40” in overall width
with frames that are 2 1/2” - 3” in size. It is also designed to fit ROPS that are angled up to 33° forward or
backwards.
1. Measure the overall width of the ROPS to determine the bracket configuration. If the width measures 35”
then only the side mount plates are required, proceed to the
step 2
. If the width is greater or less than 35”
move to
step 4
.
Fig. 1
