background image

- 3 -

Warning

•   The battery (batteries or battery pack) shall 

not be exposed to excessive heat such as 

sunshine, fire or the like.

•   Before operating this system, check the 

voltage of this system to see if it is identical 

to the voltage of your local power supply.

•   Do not place this unit close to strong 

magnetic fields.

•   Do not place this unit on the amplifier or 

receiver.

•   Do not place this unit close to damp areas 

as the moisture will affect the life of the 

laser head.

•   If any solid object or liquid falls into the 

system, unplug the system and have it 

checked  by  qualified  personnel  before 
operating it any further.

•   Do not attempt to clean the unit with 

chemical solvents as this may damage the 

finish. Use a clean, dry or slightly damp 
cloth.

•   When removing the power plug from the 

wall outlet, always pull directly on the plug, 

never yank on the cord.

•   Changes or modifications to this unit not 

expressly approved by the party responsible 
for compliance will void the user’s authority 

to operate the equipment.

•   The rating label is pasted on the bottom or 

back of the equipment.

WARNING

 

DO NOT INGEST BATTERY, CHEMICAL 

BURN HAZARD

 

If  you  think  batteries  might  have  been 

swallowed or placed inside any part of the 

body, seek immediate medical attention. 

Keep new and used batteries away from 

children. If the battery compartment does 

not close securely, stop using the product 

and keep it away from children. The remote 

control supplied with this product contains 

a coin/button cell battery. If the coin/button 

cell battery is swallowed, it can cause severe 
internal burns in just 2 hours and lead to 

death.

Correct Disposal of this product. This 

marking  indicates  that  this  product 

should not be disposed with other  

household wastes throughout the EU.   

To   p r e v e n t   p o s s i b l e   h a r m   t o   t h e 
e nv i r o n m e n t  o r  h u m a n  h e a l t h  f r o m 
uncontrolled waste disposal, recycle it 
responsibly to promote the sustainable 

reuse of material resources. To return your 

used device, please use the return and 
collection systems or contact the retailer 

where the product was purchased. They can 
take this product for environmental safe 
recycling.

The  Bluetooth®  word  mark  and  logos  are 
registered trademarks owned by Bluetooth 
SIG, Inc. We are the licensee to use such marks. 
Other trademarks and trade names are those of 
their respective owners.

Summary of Contents for Studio Bar 100















Reviews: